pxe-61 media test failure check cable Email-accv

Simple install, no plumbing Solar Hot Water! Save $$$ Click Here

pxe-61 media test failure check cable Email-accv&#

Post a Reply

From: Jatin on 09/05/2003
1) I have A7N266-vm main board with amd processor. and a D-link lan card with boot rom.(ON PCI SLOT)
2) Now i have a dhcp server configured in network.
3) I want a diskless configuration in network.
4) Have select first boot device as lan from BIOS and enable lan boot rom from advance option of BIOS.
5)Then it is giving error code like below.
a) PXE-061 Media test failor,check cable.
b) PXE-mof existing nvida boot agent.
c) disk boot failor,insert system disk and press enter
6) it is not asking for "Boot from Network ( Y / N )? althouth i have boot rom on lan card.
7) Is RPL BootRom and PXE Bootrom device are different physical devices or are same and function are different in one physical device.

Votes:

Rating: 0
Delete: 0

--- Replies to this Problem ---

From: Merlotcifer on 09/19/2006
PXE has to do with booting from LAN. Are they trying to boot from LAN and get this error message or not? If they are not booting from LAN then go to BIOS setup and disable the LAN boot ROM option.

Votes:

Rating: 0
Delete: 0

From: maruti on 12/10/2005
my system is unable to open ?

Votes:

Rating: 0
Delete: 0

From: Kryz on 10/12/2005
All you do is take your hard drive out for a few seconds and put it back in. Start your computer and go to your bios. From there, reset all your settings to default, it varies in each motheroard bios. That should work. If not, try to drain your battery, if it's a laptop. If all else fails, go to either HP live help and they might help you, even if it's not their computers or the company who makes it. Mine works fine now after HP told me what to do and I even learned a few tricks.

Votes:

Rating: 0
Delete: 0

FAQ | Search Post a Reply

Home | About | Privacy & Security | Helpful Programs

Solar Energy News and more at the TechLuck Green Energy Forum