|
Windows ME will not detect Motorola SB4101 cable m |
Post a Reply |
From: Matthew on 04/23/2003
Using a Gateway :oP
950 mhz athalon
320 mb of ram
Recently re-installed Windows ME
it detected the ethernet card (Linksys FastNC100)
but will not detect the cable modem when i plug in the cat5 cable.
(Modem is Motorola SB4101)The modem works in USB, but then i get a conflict with the printer. Cat5 cable is brand new, the items all work seperately, but wont talk to each other...and i am about to throw this puter out the window!!!
HELP!!!
| |
Votes:
Rating: 0
Delete: 0
|
|
--- Replies to this Problem ---
From: Homie on 05/05/2003
You can check and even change the IRQ usage of many devices, such as modems and network interface cards, using the Device Manager. From the Start Menu, open Settings, select Control Panel, and then double-click System. Next, click the Device Manager tab in the System Properties window. Then, click the plus sign (+) next to any device categories to show the devices themselves. Highlight the device and click Properties. Click the Resources tab and look for Interrupt Request. Also look in the Conflicting Device List for any conflicts the system has identified. (NOTE: You will not be able to do this with every device. Some of them will not have a Resources tab.)To change the IRQ, highlight Interrupt Request and click Change Setting. This won’t be possible for all devices; for some, you will first need to uncheck the Use Automatic Settings box. (WARNING: Be careful when changing IRQs./warning) There is also some software that does the work for you. go to the Norton site to see it. peace
| |
Votes:
Rating: 0
Delete: 0
|
|
From: Homie on 05/05/2003
Hey you have an IRQ conflict.Post your Email so I can send you some instruction on how to fix this problem.
| |
Votes:
Rating: 0
Delete: 0
|
|
|
