|
VMM(01)+00011D2C error after installing Pixelview |
Post a Reply |
From: Emily on 03/16/2003
After installing Pixelview nVidia GeForce MX440 64Mb driver on Asus P4PE/LAN motherboard, I encountered the blue screen error said VMM(01)+00011D2C Error: OE:0028:C0012D2C. Can someone help me, what should I do? (O/S: Windows ME with 2x512MB DDR RAM PC2700 Corsair)
| |
Votes:
Rating: 0
Delete: 0
|
|
--- Replies to this Problem ---
From: SHODAN_X on 03/18/2003
Its noy the RAM, it's your OS. Win98 and WinME are known to have this problem when the system RAM is 512mb or over. I'm pretty sure theres a patch for it at microsoft.
| |
Votes:
Rating: 0
Delete: 0
|
|
From: Emily on 03/18/2003
After days of trial and error, I've found the solution for my problem and post it here to be share with other who might have the same problem with me. Though Asus P4PE motherboard support up to 2GB RAM with it's 3 slots, seems to me that an effort to increase memory to more than 512MB will raise problems. I don't know if we use only 1 slot of RAM with 1Gb RAM but with me, when I eliminate one RAM out of the 2X512MB RAM. The problem was solved. The funny thing is, when I still installed the 2X512MB RAM, most of the error occured after installing nVidia GEForce driver was the blue screen error with notes of insufficient memory and then system halted. So, insufficient memory when use 1GB RAM but sufficient memory when use 512MB :-)
Now I have to find out how to install my other 512MB RAM without making the system crash again...M/B:Asus P4PE/LAN
Intel Pentium 4 2.53GHz
2x512MB DDR PC 2700 333Mhz Corsair
Pixelview nVidia GeForce 4 MX440 64Mb AGP 4X
| |
Votes:
Rating: 0
Delete: 0
|
|
|
